![]() ![]() However, you can also look at it this way: I understand that point of view and in a way I agree. I do understand that as a matter of principle this should not happen, NI “should not get away with this” so to speak. ![]() If you use this sensitivity and you start playing and it feels good, this might be the best option in some cases. So anything between that and most sensitive might be an acceptable workaround for those who just wanna start playing and stop dealing with NI customer support. (The $350 Nekar Aura seems to maybe be a little better but its more than $100 extra) I tested it out a little and here’s a screenshot of the sensitivity setting that to me still feels comfortable to play. In my experience however, the maschine mikro mk3 set to a little less sensitive is still the best 4x4 controller out there for the money by far. Obviously, increasing the threshold for triggering is not a real solution to the problem, but rather a workaround of an inconsistency in the pads. The other pads on the device are not that sensitive so they will function normally on the most sensitive setting. In my experience, what this means, is that the pad that get’s stuck is so ‘sensitive’ that it will permanently stay triggered on the most sensitive setting. ![]() ![]() So, I’ve been searching the interwebs for other people having problems like these and I noticed another thread somewehere where someone with a Maschine studio and a pad that got stuck and the solution was, just like mentioned here, to set the sensitivity slider to less sensitive. ![]()
0 Comments
Leave a Reply. |